THE WORLD´S #1 SOURCE FOR Night Sights | Tritium Night Sights | Glock Gun Sights | Brightest Handgun Sight

Night Fision Student Of The Gun Accur8™ Sights

Night Fision Student Of The Gun Accur8™ Sights

Night Fision Student Of The Gun Accur8™ Sights

4.67 out of 5 based on 15 customer ratings
(15 customer reviews)



We Recommend

SKU: N/A Category:


Additional information


Glock 17, 17L, 19, 22, 23, 24, 25, 26, 27, 28, 31, 32, 33, 34, 35, 37, 38, 39, Glock 42, 43, 43x, S&W Shield, CZ-USA P-10 C

Front Ring Color

Blue Front Perfect Dot With Black Rear, Orange Front Perfect Dot With Black Rear, Red Front Perfect Dot With Black Rear, White Front Perfect Dot With Black Rear, Yellow Front Perfect Dot With Black Rear

Accur8 Sight Alignment


15 reviews for Night Fision Student Of The Gun Accur8™ Sights

  1. 5 out of 5

    Justin R. (verified owner)

    Great sights. Easy to pick up even in low light condition. Solid construction perfect for one handed manipulations. I will definitely put these sights on other guns as they become available. Another quality product from the mind of Paul Markel.

  2. 5 out of 5

    mafroelicher (verified owner)

    Excellent sights! Point of aim, point of impact quick and easy to pick up.

  3. 5 out of 5

    Alex W (verified owner)

    Works as advertised. Point of aim, point of impact. Very easy to pick up front sight and they are well contructed. If you are looking into any sights for your Glock, these are the ones.

  4. 5 out of 5

    Andrew D (verified owner)

    I put these on a custom G34 cut down to G19 pistol height. Simply put these sights WORK GREAT!! If I could post pictures I would. On a two hand slow fire I can easily keep them with in the 4″ targets at 3 yards and at 15 yards. These sights are most Definitely point of aim point of impact. When I switch to rapid fire with magazine changes I can hardly see a difference between that and my two hand slow fire target. The large front sight is easy to pick up when driving out or with follow up shots, especially with the blacked out rear sight. My rapids shots definitely improved with these sights. If anyone has messed with the double bead shotgun sights you’ll get how great the figure 8 concept is with these sights. Stack the tritium dots and you’re on target.

  5. 5 out of 5

    Brandon Whitney (verified owner)

    Installed my Accur8 sights about a week ago. The sights installed very smooth. POA POI is right in with these sights. Best sights I have used.

  6. 5 out of 5

    Brandon Whitney (verified owner)

    Straight forward install. Super bright tritium. Sights have preformed flawless for 500 rounds. Point of aim point of impact.

  7. 5 out of 5


    These are quickly becoming my favorite sights. The stacked dots are easy to use and seem very natural compared to a 3 dot set up. I’ve had no issues with transitioning to different lighting conditions when practicing clearing the house. The blue front is kickass, although I was hoping for a little more ‘blue’. The blue front is bright enough to grab attention, but not so bright that it becomes distracting (an issue I have with orange fronts, yellow/green are hit or miss for me). I’ll be putting theses on all of my pistols in the future.

  8. 5 out of 5


    These sights are amazing! The bright front dot is quick to pick up and the black rear is less confusing. Also, the two dot system is more intuitive and faster in low light,

  9. 3 out of 5

    Erik (verified owner)

    The tolerances were way off on my accur8 sights, specifically the width of the dovetail. I not only had to remove a significant amount of material from the bottom of the dovetail (+1mm) on the rear sight to allow it to fit in the slide’s cutout, but had to trim the top of the dovetail with a dremel to fit the horizontal gap. Even at the thinnest, the sight was too wide to fit the Glock dovetail cutout. I had ordered the correct part, and the package confirmed that I was sent the right part… it just wasn’t machined properly.

    The tritium is bright, no complaints there. And now that the sights are installed, I love them. I’m shooting 1-2” groups at 11 yards consistently, and point of aim corresponds with point of impact using 115’s as opposed to the 124 noted on the installation materials.

    But the quality control loses two stars, for a 3 of 5 final rating.

  10. 5 out of 5

    gunfighter25 (verified owner)

    Excellent sights. They pick up real easy when aiming. Install was easy too didn’t have to do any fitting they seated 50% in the first time.

  11. NF Admin

    Thank you for your comment, we are glad you are shooting well and enjoying the sights. We deliberately oversize our dovetails in order to fit the OEM’s broad tolerances (believe it or not, they vary) while also attempting to accommodate the wide range of aftermarket slides and corresponding dovetails as well. The old adage, “you can always remove material, but you can’t add it” rings true here. We apologize for the inconvenience but are thankful you are loving the sights now that you’re back to shooting!

  12. 3 out of 5

    Nick Raymon (verified owner)

    I have had many different brands of night sights, and I will say that these are the fastest to acquire (while still being accurate) that I have tried. They are also the brightest in low light. The only negative (and it is a pretty big one) is that they have very sharp edges. Sights on any carry gun should have smooth edges so as not to snag on your clothes. Unfortunately, these have extremely sharp edges and could possibly snag on your clothes. If they fix this they will have the perfect night sights for a defensive handgun.

  13. 5 out of 5

    James shields

    Excellent sights ! I’m a experienced shooter , I’ve had hundreds of hours training and have used all different brands and configurations of sights. You name it I’ve used it. These are the clear winner. I got the yellow ones and they are super bright. Just put the big dot in the notch and your there. In low light they really shine, I’ve had night classes and 3 dot sights can looks confusing believe it or not. You can put the front sight dot on the outside of the rear sights. It’s easy to do. With the accurate sights you stack the big dot on the small dot and your there. Trust me these are better. I put these on my 2 Glock 17s and will put them on any future guns. I waited almost a year to rate these so I could really try them out and they passed with flying colors. Paul Markel knows his stuff , trust me. James Shields.

  14. 5 out of 5

    Chris Austin (verified owner)

    Put these on my P10c earlier this week and shot today. After reading reviews, I thought that the yellow front that I got might be too distracting, but in no way does it overpower the sight picture. I only put 100 rounds through it today, but I can say that these are now my favorite sights! These are truly nice. PoA = PoI! One last thing: installation was a breeze. I have read some folks having issues (must be that Glock perfection! lol just kidding glock guys, just kidding) with tolerances, but a few taps on the front and in, and the rear sight stopped about half way before having to use force to finish the install, just like it should! Thanks Night Fision!

  15. 4 out of 5

    Joseph A. (verified owner)

    I have a set of these on a Glock 19x and they are amazing. Great sight picture, great tritium brightness, POI=POA. I also bought a pair for the Glock 43x and upon installation I noticed an issue. The front sight seems really tall. Surely enough at 15 yards are I shooting consistently low a good 3-4 inches. With factory sights I was on target with the 43x. With the 19x it was POA=POI from day one. I shoot a p365, hellcat, and G26 well so subcompacts/microcompacts are not an issue for me. If the 43x front sight were a tad shorter it would be perfect. At the range when I let the orange front circle hover up such that it was cut in half by the rear post I was on. I wish there was an easy fix for the front sight issue on the 43x.

  16. 5 out of 5

    Seth J

    Fantastic set of sights. Once the 43x MOS came out, I immediately went on the hunt for a set of sights that would lower 1/3 co witness with the Holosun 507k. Once I learned what the specs of the CH Precision plate we’re going to be, I then knew what height sights I needed. No one else was making a “suppressor height” set for the 43x MOS and even though these are not label as such, the dimensions all lined up to work perfectly. I installed them today (10/16/2020) along with my CH Precision plate and Holosun 507k and boom!! Perfect lower 1/3 co witness just like I expected. PLUS .. they do NOT hang over the back of the slide! These are perfect

Add a review

Your email address will not be published. Required fields are marked *

You may also like…